In cold places, we want hot coffee or hot tea, hot food.
We design for reducing heat flow, e.g. heat exchanger, building insulation, thermos flask and so on. Thermal insulation materials must have low thermal conductivity. This is achieved by trapping air or some other gas inside small cavities in a solid. Low conductivity of gas to inhibit heat flow. Heat can ,however, be transferred by natural convection inside the gas pockets and by radiation between the solid enclosure walls.
There are essentially three types of insulation materials :
Fibrous materials consist of small diameter particles or filaments of low density that can be poured into a gap as “loose-fill” or formed into blankets. Fibrous materials have high porosity.
- Mineral wool for temperature below 700°C
- Fiberglass for temperature below 200°C
- Refractory fibers such as Alumina or Silica for temperature between (700°C to 1700°C)
Cellular insulation are closed or open cell materials that are usually in the form of flexibile or rigid boards. Low density or low heat capacity and good compressive strength are their advantages. E. g.
- Expanded polystyrene foam.
Granular insulation consist of small particles of inorganic materials bonded into desired shapes or used as powder. E. g.
- Perlite powder
- Diatomaceous Silica